Diamon-Fusion for Fabricators2018-09-07T20:36:41+00:00

DIAMON-FUSION FOR FABRICATORS

“We knew that if we were going to become the premier supplier of custom shower glass in our market that we needed a high-quality coating like Diamon-Fusion. We’ve also seen the growing use of DFI coatings on exterior building glass and are keen to capitalize on that new trend.”

— Ruby Singh | President, Glassfab Tempering Services

DIAMON-FUSION FOR FABRICATORS

“We knew that if we were going to become the premier supplier of custom shower glass in our market that we needed a high-quality coating like Diamon-Fusion. We’ve also seen the growing use of DFI coatings on exterior building glass and are keen to capitalize on that new trend.”

— Ruby Singh | President, Glass Fab Tempering Services

Trusted low-maintenance coating for glass fabricators and manufacturers worldwide, looking to differentiate their business and provide long-lasting durability to their glass and glass-like surfaces.

Zero cure time process

Limited lifetime warranty

Prevents staining and corrosion

Wide application range

HOW DIAMON-FUSION WORKS.

Diamon-Fusion is an ultra-thin transparent glass coating that can be applied to a wide range of glass and glass-like surfaces in the residential, commercial and automotive markets. Similar to a non-stick cooking pan, cleaning is done less frequently and made easier using only water and a microfiber towel. Its breakthrough in nanotechnology is at the forefront of the industry.

GLASS IS NATURALLY POROUS

Untreated glass is naturally porous which allows hard water and contaminants to penetrate the surface causing stains and corrosion. Over time these contaminants can destroy the beauty of the glass.

STAGE ONE: FILLS IN THE GAPS

Diamon-Fusion fills in the peaks and valleys of the glass by creating a chemical reaction that causes a “cross-linked” and “branched” silicone film to be grown out from below the surface.

STAGE TWO: CAPS THE PROCESS

The second stage ‘caps’ the entire chain of atoms. This unique ‘capping’ substantially increases the hydrophobicity and durability of the glass, leaving no points of attachment – completing the Diamon-Fusion process.

Download our technical datasheet to learn more about the science behind how
Diamon-Fusion protective coating works.

COAT WITH CONFIDENCE.

Superior surface protection

Diamon-Fusion delivers the promise of low-maintenance protection to any silica-based surface by sealing the peaks and valleys. The result: an invisible coating that prevents hard water stains and corrosion.

Hydrophobic and oleophobic

Similar in functionality to a non-stick cooking pan, silica-based surfaces treated with Diamon-Fusion are much easier to clean than non-treated surfaces. From hard water stains to environmental pollutants, fewer contaminants can stick to the surface, reducing cleaning times up to 90%.

Two-step patented process

Diamon-Fusion is two-step patented process that creates a covalent bond by filling in the microscopic ridges and is then “capped” and sealed to enhance the smoothness of the surface. If you are looking for a single-step process, check out Clear Fusion Pro.

Seals the glass surface

When applied to untreated glass, Diamon-Fusion chemically bonds to the silica in the glass, sealing the surface from harmful contaminants. The glass is easy to handle after application and does not slip.

Wide range of applications

Diamon-Fusion can be applied to a wide range of glass and glass-like surfaces, including glass railings, solar panels, skylights, tile, porcelain, granite, tempered glass, acid etched glass, sandblasted glass, insulated glass, patterned/textured glass, bent glass, tinted glass and frosted glass.

No cure time

Unlike other protective coatings, Diamon-Fusion has no cure time; so, once the protective coating is applied to any surface, the benefits can be noticed immediately and the glass is ready for handling and/or shipping.

Easier and less frequent cleanings

Silica-based surfaces treated with Diamon-Fusion are much easier to clean than non-treated surfaces. From hard water stains to environmental pollutants, fewer contaminants can stick to the surface, significantly reducing cleaning times.

Lifetime warranty

Diamon-Fusion comes with a limited lifetime warranty on residential applications and a 15-year warranty for commercial applications. The patented coating is guaranteed to perform for the lifetime of the glass and will never yellow, chip, haze peel, crack or discolor. Click here to learn more.

No special cleaning products required

Diamon-Fusion comes with a lifetime warranty on shower glass that needs only to be upheld by following the basic care instructions. No special cleaning products or Revitalizer are required to maintain the warranty.

UV stable and eco-friendly

Diamon-Fusion is 100% optically clear, UV stable (won’t break down in sunlight) and prevents damaged glass from undergoing costly replacement projects. Diamon-Fusion also promotes a healthier more hygienic environment by preventing the build-up of mold and harmful bacteria.

Download our brochure and learn about all the benefits Diamon-Fusion
low-maintenance, easy-to-clean coating offers.

RELIED UPON BY MANUFACTURERS AND FABRICATORS WORLDWIDE

COAT WITH CONFIDENCE.

Superior surface protection

Diamon-Fusion delivers the promise of low-maintenance protection to any silica-based surface by sealing the peaks and valleys. The result: an invisible coating that prevents hard water stains and corrosion.

Hydrophobic and oleophobic

Similar in functionality to a non-stick cooking pan, silica-based surfaces treated with Diamon-Fusion are much easier to clean than non-treated surfaces. From hard water stains to environmental pollutants, fewer contaminants can stick to the surface, reducing cleaning times up to 90%.

Two-step patented process

Diamon-Fusion is two-step patented process that creates a covalent bond by filling in the microscopic ridges and is then “capped” and sealed to enhance the smoothness of the surface. If you are looking for a single-step process, check out Clear Fusion Pro.

Seals the glass surface

When applied to untreated glass, Diamon-Fusion chemically bonds to the silica in the glass, sealing the surface from harmful contaminants. The glass is easy to handle after application and does not slip.

Wide range of applications

Diamon-Fusion can be applied to a wide range of glass and glass-like surfaces, including glass railings, solar panels, skylights, tile, porcelain, granite, tempered glass, acid etched glass, sandblasted glass, insulated glass, patterned/textured glass, bent glass, tinted glass and frosted glass.

No cure time

Unlike other protective coatings, Diamon-Fusion has no cure time; so, once the protective coating is applied to any surface, the benefits can be noticed immediately and the glass is ready for handling and/or shipping.

Easier and less frequent cleanings

Silica-based surfaces treated with Diamon-Fusion are much easier to clean than non-treated surfaces. From hard water stains to environmental pollutants, fewer contaminants can stick to the surface, significantly reducing cleaning times.

Lifetime warranty

Diamon-Fusion comes with a limited lifetime warranty on residential applications and a 15-year warranty for commercial applications. The patented coating is guaranteed to perform for the lifetime of the glass and will never yellow, chip, haze peel, crack or discolor. Click here to learn more.

No special cleaning products required

Diamon-Fusion comes with a lifetime warranty on shower glass that needs only to be upheld by following the basic care instructions. No special cleaning products or Revitalizer are required to maintain the warranty.

UV stable and eco-friendly

Diamon-Fusion is 100% optically clear, UV stable (won’t break down in sunlight) and prevents damaged glass from undergoing costly replacement projects. Diamon-Fusion also promotes a healthier more hygienic environment by preventing the build-up of mold and harmful bacteria.

Download our brochure and learn about all the benefits Diamon-Fusion
low-maintenance, easy-to-clean coating offers.

RELIED UPON BY MANUFACTURERS AND FABRICATORS WORLDWIDE

COMMITTED TO YOUR SUCCESS

Can Contribute to LEED Points

DFI is proud to present a continuing education webinar – Hydrophobic Coatings: Improve Sustainability and Reduce Maintenance Costs. This course has been approved by the American Institute of Architects (AIA) for 1 AIA HSW CE Hour and by Green Business Certification Inc. (GBCI) for 1 GBCI CE Hour. To learn more about the webinar click below or check our available presentations to the right.

Unparalleled Marketing Support

And we mean that… Our marketing, sales and executive team will become part of your team, helping to launch, promote and nurture your company’s strategies and growth. Whether its creating custom branded marketing material, going on ride-alongs with your customers or providing in-house training to help your company make the switch, we promise to deliver an excellent experience.

MAKE THE COATING SWITCH
CHECK OUT THESE ADDITIONAL RESOURCES

Registration Program

DFI offers an online shower door warranty registration program so you don’t have to worry about callbacks.

DOWNLOAD THE BROCHURE

See How it Works

See the science behind how Diamon-Fusion protects glass from staining and corrosion.

VIEW THE DOCUMENT

Commercial Brochure

Want to learn more about the benefits of Diamon-Fusion in the commercial and hospitality sector?

DOWNLOAD THE BROCHURE

Coupon Code Program

Want to profit from selling DFI aftercare products to existing customers?

DOWNLOAD THE SHEET

CONTACT US TODAY

Have a question? Reach out and schedule a call with our team.

CHECK OUT THESE ADDITIONAL RESOURCES

Registration Program

DFI offers an online shower door warranty registration program so you don’t have to worry about callbacks.

DOWNLOAD THE BROCHURE

See How it Works

See the science behind how Diamon-Fusion protects glass from staining and corrosion.

VIEW THE DOCUMENT

Commercial Brochure

Want to learn more about the benefits of Diamon-Fusion in the commercial and hospitality sector?

DOWNLOAD THE BROCHURE

Coupon Code Program

Want to profit from selling DFI aftercare products to existing customers?

DOWNLOAD THE SHEET

CONTACT US TODAY

Have a question? Reach out and schedule a call with our team.